Using the gas
Before
first use
IMPORTANT: Y
(Please see the
Switching the hob on
The following sym
c n o
o r l knob:
t
= gas off
L
arge flame: maximum setting
Small flame: minimum setting
o The symbol on the control panel, next to the control knob will
indicate which gas burner it operates.
o The minimum setting is at the end of the anti-clockwise rotation of
the control knob.
o All operation positions must be selected between the maximum and
minimum position.
o Never select a knob position between the maximum and off
position.
The symbol on the control panel, next to the control knob will
o
indicate which gas burner it operates.
Automatic ignition with flame failure safety device
T
he appliance is fitted with a fl
burner, which is des
t
he event of the flam
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
hob
ou should clean the hob surface.
"Cleaning and maintenance" section).
bols will appear on the control panel, next to each
ame failure safety device on each
igned to stop the flow of gas to the burner head in
e going out.
14