External Presentation Units - Panasonic EBL128 Planning Instructions

Panasonic Electric Works Nordic AB
MEW01090 Rev: 3
6.2.3
All or selected fire alarms will be presented in a display
(alphanumeric LCD, 2x40 characters), with back-light.
alarm text will also be presented together with each alarm, if
programmed in EBL128. Furthermore, at least 617 texts can for
selected fire alarms be stored in the unit and will in such a case
be shown, instead of the texts sent out from EBL128 for these
alarms. These text messages will be downloaded to the unit via
EBL128. A built-in buzzer will sound to indicate a not
acknowledged AA alarm.
New software versions can be downloaded directly in the unit.
The unit is power supplied from EBL128 or an external power
supply.
The unit has the following LEDs:
Fire and Alarms queued, indicating fire / AA alarm.
Operation, indicating that the unit is in operation, i.e. the AA
function is enabled in the system. A time channel can be used
to enable the AA function.
Fire brigade alerted, indicating that the "Fire brigade tx"
output is activated in EBL128 because:
- the activated fire alarm is not an AA alarm
- the AA function has been ended, e.g. the acknowledge or
investigation time respectively has run out, etc.
Acknowledge, indicating that the AA alarm has been
acknowledged.
The unit has the following push buttons:
Alarms queued, used to scroll amongst the alarms.
Acknowledge, used to acknowledge an AA alarm and hereby
also silence the buzzer.
Reset, used to reset an AA alarm.
The unit shall run in S/W mode 1735 – 1587, which has the
highest performance with regard to functionality, response time,
ability to store alarms, etc. Up to 1200 m cable can be used.
For more information, see Technical description MEW00224.
1736 Alert Annunciation Unit (AAU). This unit is like 1735, except
it has a neutral front, where the designation texts, in any
language, are made separately and by production put into a
transparent "text slot" for the LED and push button respectively.
(This front also holds one extra LED & two extra push
buttons.).
The unit shall run in S/W mode 1736 – 1587, which has the
highest performance with regard to functionality, response time,
ability to store alarms, etc. Up to 1200 m cable can be used.
For more information, see Technical description MEW00224.

External Presentation Units

1728 External Presentation unit (EPU). A compact size enclosure
(HxWxD, 145 x 220 x 50 mm) made of grey high impact ABS.
EBL128 Planning Instructions V1.1.x
48
An