Assigning A Diii-Net Address For Each Air Conditioner; Remote Controller Buttons And Areas - Daikin DCM601A72 Installation Manual

4 Assigning a DIII-NET address for each air condi-
tioner
In a DIII-NET system, there is a management number for identifying each air conditioner.
This can be referred to as DIII-NET address. A DIII-NET address needs to be assigned
manually using the remote controller for each air conditioner.
There are remote controllers of several types, each requiring a different way of assigning
a DIII-NET address. This section describes commonly used two types of remote control-
lers, wired and navigation remote controllers, as examples.
• Make sure that the iTM plus adaptor is connected to the intelligent Touch Man-
ager and that both units are powered on. Unless both are powered on, you
cannot perform DIII-NET address assignment for your air conditioners.
• For how to assign addresses for Ventilator (Heat Reclaim Ventilator) equipment
and various adapters (such as a universal adapter), refer to the manual for each
product.
4.1

Remote controller buttons and areas

The names of buttons and areas of a wired remote controller used in this section are
shown below.
A
B
C
D
E
F
The names of buttons and areas of a navigation remote controller used in this section are
shown below.
A
B
C
D
E
F
English
CAUTION
Address display area
Parameter number display area
Programming time buttons
Temperature setting buttons
Timer ON/OFF button
Inspection / Test operation button
Display
Up button
Menu / Enter button
Right button
Cancel button
Down button
Installation Manual 3P291714-4
DCM601A72 iTM plus adaptor
<Wired remote controller>
<Navigation Remote controller>
A
B
C
D
E
F
A
B
C
D
E
F
25