The 8021X Screen - ZyXEL Communications VWG1312-B10A User Manual

6.5 The 8021x Screen

You can view and configure the 802.1x authentication settings in the 8021x screen. Click Network
Setting > Broadband > 8021x to display the following screen.
Figure 25 Network Setting > Broadband > 8021x
The following table describes the labels in this screen.
Table 13 Network Setting > Network Setting > 8021x
LABEL
#
Status
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel
VMG1312-B10A User's Guide
DESCRIPTION
This is the index number of the entry.
This field displays whether the authentication is active or not. A yellow bulb signifies that
this authentication is active. A gray bulb signifies that this authentication is not active.
This is the interface that uses the authentication. This displays N/A when there is no
interface assigned.
This shows the EAP identity of the authentication. This displays N/A when there is no EAP
identity assigned.
This shows the EAP method used in the authentication. This displays N/A when there is no
EAP method assigned.
This shows whether bidirectional authentication is allowed.
This shows the certificate used for this authentication. This displays N/A when there is no
certificate assigned.
This shows the Trusted CA used for this authentication. This displays N/A when there is no
Trusted CA assigned.
Click Apply to save your changes back to the Device.
Click Cancel to return to the previous configuration.
Chapter 6 Broadband
101