ZyXEL Communications VWG1312-B10A User Manual page 54

Chapter 4 Tutorials
Click Class Setup > Add new Classifier to create a new class. Check Active and follow the
3
settings as shown in the screen below.
Tutorial: Advanced > QoS > Class Setup
Class Name
From
Interface
Ether Type
IP Address
MAC Address
To Queue
Index
54
Give a class name to this traffic, such as E-mail in this example.
This is the interface from which the traffic will be coming from. Select LAN1 for this
example.
Select IP to identify the traffic source by its IP address or MAC address.
Type the IP address of your computer - 192.168.1.23. Type the IP Subnet Mask if you
know it.
Type the MAC address of your computer - AA:FF:AA:FF:AA:FF. Type the MAC Mask if you
know it.
Link this to an item in the Network Setting > QoS > Queue Setup screen, which is the E-
mail queue created in this example.
VMG1312-B10A User's Guide