ZyXEL Communications VWG1312-B10A User Manual page 166

Chapter 9 Routing
You can use source-based policy forwarding to direct traffic from different users through different
connections or distribute traffic among multiple paths for load sharing.
The Policy Forwarding screen let you view and configure routing policies on the Device. Click
Network Setting > Routing > Policy Forwarding to open the following screen.
Figure 61 Network Setting > Routing > Policy Forwarding
The following table describes the labels in this screen.
Table 39 Network Setting > Routing >Policy Forwarding
LABEL
Add new Policy
Forward Rule
#
Policy Name
Source IP
Source Subnet
Mask
Protocol
Source Port
WAN
Modify
166
DESCRIPTION
Click this to create a new policy forwarding rule.
This is the index number of the entry.
This is the name of the rule.
This is the source IP address.
his is the source subnet mask address.
This is the transport layer protocol.
This is the source port number.
This is the WAN interface through which the traffic is routed.
Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the Device. A window displays asking you to
confirm that you want to delete the policy.
VMG1312-B10A User's Guide