ZyXEL Communications VWG1312-B10A User Manual page 266

Chapter 27 Remote Management
The following table describes the fields in this screen.
Table 99 Maintenance > Remote MGMT
LABEL
Trust Domain
Status
IP Address
Services
LAN/WLAN
WAN
Trust Domain
Port
Certificate
HTTPS
Certificate
Apply
Cancel
266
DESCRIPTION
This field displays whether the Trust Domain is active or not.
Enter the Trust Domain IP address.
This is the service you may use to access the Device.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the LAN/WLAN.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the WAN.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the Trust Domain.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
VMG1312-B10A User's Guide