The Reboot Screen - ZyXEL Communications VWG1312-B10A User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 141 Reset Warning Message
Figure 142 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Device.
Refer to Section 1.6 on page 25

34.3 The Reboot Screen

System restart allows you to reboot the Device remotely without turning the power off. You may
need to do this if the Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Device reboot. This does not affect the
Device's configuration.
Figure 143 Maintenance > Reboot
VMG1312-B10A User's Guide
for more information on the RESET button.
Chapter 34 Configuration
285