Clearing Paper Jams In Tray 4 - Xerox Docucolor 2060 NPS/IPS Troubleshooting Manual

Clearing paper misfeeds and jams

Clearing paper jams in tray 4

4-14
A message on the touch screen notifies you of a paper jam in
tray 4 and provides instructions for clearing it.
To clear a paper jam from tray 4:
1. Locate the tray 4 icon on the tray 4 control panel. Open the
doors indicated.
2. Press the Tray Unlock button.
3. Wait until the Ready to Open indicator is illuminated.
4. Open the tray 4 left door. Remove any misfed paper from the
tray 4 paper tray.
5. Open the tray 4 right door. Remove any paper from the tray 4
horizontal transport by lifting the green handle and turning the
green knob in the direction of the arrow.
6. Open the left side door of the printer.
Figure 4-13. Left side door
1. Printer rear
2. Printer front
7. Carefully remove all jammed paper, ensuring that all pieces
are removed if the paper rips.
8. Close the tray 4 doors.
The elevator tray automatically rises and stops at the correct
feeding height.
9. Follow the instructions displayed on the touch screen and tray
4 icon to resume printing.
NOTE: If the printer does not resume printing after a paper tray
fault or after paper is loaded, lower then raise the tray. The
system should resume printing.
Troubleshooting Guide