Xerox Docucolor 2060 NPS/IPS Troubleshooting Manual page 35

Troubleshooting Guide
Figure 4-8. Exit module
To clear a jam in the exit module:
1. Open the exit module door.
2. When printing one-sided or two-sided, squeeze and
open green handle 8a.
3. Squeeze and open green handle 8b.
4. Squeeze and open green handle 8c.
5. Squeeze and open green handle 8d.
6. Squeeze and open green handle 8f.
7. Carefully remove all jammed paper.
8. Turn green knob 8e to free any immovable paper.
9. Reposition the green handle 8a and ensure the
handle is seated properly.
10. Reposition the green handle 8b and ensure the
handle is seated properly.
11. Reposition the green handle 8c and ensure the
handle is seated properly.
12. Reposition the green handle 8d and ensure the
handle is seated properly.
13. Reposition the green handle 8f and ensure the
handle is seated properly.
14. When printing two-sided or face down output, lift
handle 8g.
15. Carefully remove all jammed paper.
16. Reposition the green handle 8g and ensure the
handle is seated properly.
4-9