2
Installation and safety considerations
Package contents (ICX6650-32-ADV)
The following items are included in your shipping carton:
•
•
•
CAUTION
The filler panels must be in place if operating the switch with only one power supply and fan.
Installation and safety considerations
You can install the Brocade ICX 6650 in the following ways:
•
•
•
•
Electrical considerations
To install and operate the switch successfully, ensure compliance with the following requirements:
•
•
•
24
•
One mini-USB (M)-DB9(F) cable
•
Two mounting ears and screws
•
Grounding terminal
A Brocade ICX 6650 device
One accessory kit, containing the following items:
•
One RJ45 to DB9F adaptor
•
One RJ45 crossover cable
•
One mini-USB (M)-DB9(F) cable
•
Two mounting ears and screws
•
Grounding terminal
Installed filler panels for the right power supply unit (PSU1) slot and left fan slot.
As a standalone unit on a flat surface.
In an EIA cabinet using a fixed-rail rack mount kit. The optional fixed-rail rack mount kit can be
ordered from your switch retailer. Both the 24"-28" rack depth kit and the 28"-32" rack depth
kit will work with the ICX 6650 device.
In a 2-post Telco rack using a flush mount rack kit. The optional flush mount rack kit for
switches can be ordered from your switch retailer.
In a 2-post Telco rack using a mid-mount rack kit. The optional mid-mount rack kit for switches
can be ordered from your switch retailer.
The primary outlet is correctly wired, protected by a circuit breaker, and grounded in
accordance with local electrical codes.
The supply circuit, line fusing, and wire size are adequate, as specified by the electrical rating
on the switch nameplate.
The power supply standards are met.
Brocade ICX 6650 Hardware Installation Guide
53-1002599-02