Easy Controller (Ca-9); Fixture Settings; Operation - Chauvet MiN Spot RGBW User Manual

Easy Controller (CA-9)

This fixture is compatible to receive control from the Chauvet® CA-9 easy controller (remote control). Please
see the instructions below for details on this operation.

Fixture Settings

In order for the fixture to respond to the easy controller, there are certain settings which must be
modified. Please see the instructions below for details on this operation.
Master Fixture settings:
1. Press <MENU> until one of the "Operating Modes" appears on the LED screen.
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select
4. Press <ENTER>.
5. Plug the Easy controller into the fixture's "Remote Control" connection, shown on the back panel
drawing on the Product Overview section of this user manual.
Slave Fixture settings:
1. Press <MENU> until
2. Using <UP> and <DOWN>, set the DMX address to
3. Press <MENU> until one of the "Operating Modes" appears on the screen.
4. Using <UP> and <DOWN>, set the mode to
5. Press <ENTER>.

Operation

There are multiple functions that the CA-9 may control. Please see the following details on how to
operate these.
•
Standby button: activates/deactivates the BLACKOUT function
•
Function button: activates/deactivates the strobe function; the strobing rate is fixed
•
Mode button: switches between automatic and sound-activated chase modes.
4. Operating Instructions
NStc
.
d 1
appears on the LED screen.
-when the LED is ON, BLACKOUT is activated
-there is no LED indicator for this function; strobe will be either ON or OFF
-when the LED is ON, the fixture is in sound-active mode
-the sound-activated mode uses the microphone on the fixture, NOT on the
controller
Standby LED
indicator
Mode LED
indicator
13
d 1
.
SLAv
on the LED screen.
Standby
button
Function
button
Mode
button
6/14/2010 4:13 PM