5. COLOR
ADO
Overview
LCD Display
MODE
menu
SETUP
confirms the current function value
Setup
1)
Connect from the OUT on the controller to the DMX Input side of the COLORado™ using a
DMX XLR cable. Visit the section titled: COLORcon Setup on page 22.
2)
It is recommended that you power up all COLORado units connected prior to turning on the
controller. This ensures that the controller will auto-detect DMX addresses.
Alternatively you can use {Detect device} from the {Settings} menu.
3)
Set ID addresses on the COLORados in ascending order.
4)
Set the {Range} in the {Settings} menu.
Note
COLORado™6 User Manual
™ C
ONTROLLER
MODE
SETUP
UP
DOWN
Accesses main menu or backs out of sub-
Selects the currently displayed menu or
There is no need to set ID and Range for {Wash} programs.
29
SOLD
SEPARATELY
1/15/2008 11:12 AM