Copyright - dbx Zone Pro 1260 User Manual

Appendix A
work connection between two devices. The following steps outline how to use this utility.
If you get a "reply from" response from the IP address that you were pinging in a timely man-
ner, it means that you have a valid network connection between the two devices.
If you receive a "Destination net unreachable" or "Request timed out" message, this indicates
that your computer is not communicating with the ZonePRO device.
A.7 - Copyrights
Portions of code are covered by the following copyrights:
X Consortium
Copyright (C) 1996 X Consortium
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, subli-
cense, and/or sell copies of the Software, and to permit persons to whom the Software is fur-
nished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or sub-
stantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X
CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON-
NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
ZonePRO™ User Manual
64
If you fail to see a link light try removing and reinserting the cable or trying a different,
known good, cable. Also, make sure that you are using the correct cable. The included
crossover cable is only for making a direct connection between your PC and the ZonePRO
1260 / 1261.
Ping: There is a simple utility built into Microsoft windows operating systems that test the net-
1. Click on Run... from start button.
2. Enter cmd and press OK. This will bring up a command window.
3. At the prompt enter PING <IP address of your ZonePRO> and press enter. The data
should appear something like this:
Pinging 10.10.10.1 with 32 bytes of data:
Reply from <IP address of your ZonePRO>: bytes=32 time<1ms TTL=64
Reply from <IP address of your ZonePRO>: bytes=32 time<1ms TTL=64
Reply from <IP address of your ZonePRO>: bytes=32 time<1ms TTL=64
Reply from <IP address of your ZonePRO>: bytes=32 time<1ms TTL=64
™
ZonePRO