1260)Front Panel - dbx Zone Pro 1260 User Manual

ZonePRO
1. LCD Display
The backlit LCD display of the ZonePRO 1260 provides the end-user with all the necessary con-
trols including source selection, page steering, zone volume and mute.
2. Parameter Select 1-3
These three buttons are used to select and edit parameters.
3. Data Wheel
The Data Wheel is used to edit parameter values.
4. Page Buttons 1-2
The Page buttons are used to select the page mic path and steer it to selected zones.
5. Zone Select
These buttons are used to select output zones for front panel control.
6. Output Meters
The ZonePRO 1260 provides the user with six independent six-segment Lightpipe output meters that
range from -30 to +20 dBu.
7.Threshold Meters
The threshold meters indicate that the threshold level has been exceeded within the output
Compressor, Auto Gain Control, or Limiter sections, and gain reduction may be taking place.
1. PC Connection
This DB-9 connection is used to communicate to the PC via RS-232 protocol.
2. Network Traffic LED
This LED is used to indicate Network Traffic; it is also used to indicate and identify the unit
when the Locate function is enabled.
3. Power LED
This LED (when lighted), indicates that the ZonePRO 1261 is currently powered.
™
Getting Started
1.2 - Front Panel (1260)
1.3 - Front Panel (1261)
ZonePRO™ User Manual
Section 1
3