Auto Warmth; Zonepro - dbx Zone Pro 1260 User Manual

™

ZonePRO

Section 4
Detailed Parameters
Threshold -40 to +20dBu
Threshold is the level from the priority or page source at which the Ducker will attenuate the
Router source.
Depth Inf to 0dB
This parameter sets the amount of Ducker attenuation.
Attack 0.1 m Sec to 200 m Sec
Attack is how quickly the signal is attenuated by the Ducker
Hold 0.1 to 20.2 m Sec
Hold time is the length of time before the Ducker releases.
Release 0.0 to 10.0 dB/Sec
Release is how quickly the attenuated signal returns to its nominal level.
Fader (Mixer Module Selected)
The fader parameter allows you to control the output volume of each mixer channel

4.10 - Auto Warmth

®
The ZonePRO™ 1260 and 1260 offer the AutoWarmth® module on each output. AutoWarmth®
is a patent pending process that compensates for naturally occurring bass frequency loss for low
level signals. The Fletcher-Munson Equal Loudness curves show that the perception of low fre-
quency signals decreases quickly with decreasing loudness. AutoWarmth® gradually boosts the
low end in response to the overall loudness of the signal. The result is warm and balanced sig-
nal at low levels.
Auto Warmth On/Off
This parameter is used to turn the Autowarmth module on and off.
ZonePRO ™ User Manual
30