Unit View Functions - dbx Zone Pro 1260 User Manual

™
ZonePRO
Section 2
Software Overview

2. 4 - Unit View Functions

The Unit View provides access to the signal routing configuration, Zone Controller assignment,
and processing parameters.
2.4.1 File Menu
The File Menu selection allows saving of the existing ZonePRO device file (.zpd) as well as
recalling of other files. The device file provides a way to store off the entire ZonePRO unit to
a computer, which includes the configuration, scenes, and schedule information. To save a
ZonePRO device file, select File then Save from the Menu bar. Recalling a saved file can be
done by selecting Open from the File Menu. Once all of your changes have been made, sim-
ply close the file with the Close selection.
2.4.2 Edit Menu
To edit a processing module, double click on that module. Adjust the module to taste; make
sure that the module is engaged. This is usually indicated by the module ON button in the
upper left corner of the parameter section. Although process editing is done in real-time, the
changes can either be discarded or accepted by selecting the OK or CANCEL button.
Parameters can be copied and pasted between like modules in the ZonePRO GUI. From the
program screen either right click on the module and select Copy, or select Edit and Copy from
the Menu Bar to Copy parameters. To paste, either right click and select Paste, or click on Edit
Paste from the Menu bar. Selecting Time in the Edit Menu allows editing of the date and time
in the ZonePRO device's real time clock
2.4.3 Scenes Menu
Scenes include parameter data and zone controller assignment. Multiple scenes can be saved
and recalled by either clicking on the Scene tab of the Menu bar and selecting Store or Recall
Scene, or by using the Store Scene and Recall Scene buttons at the bottom of the Unit view win-
dow.
ZonePRO ™ User Manual
8