™
ZonePRO
Section 4
Detailed Parameters
The following section will provide you with a module block representation for each effect, as
well as descriptions and explanations of all parameters within the ZonePRO.
4.1 - Input
The signal routing begins at the INPUT block of the ZonePRO™.
Gain Level -Inf to 20dB
Adjusts the input level.
HP Frequency Off, 14.96Hz to 118.85Hz (Mic Inputs and RCA S1-S2)
Adjusts the input High Pass cutoff frequency on the mic/line inputs.
4.2 - Parametric EQ
The ZonePRO units offer both Pre and Post-crossover parametric sections on each input, and
may be configured as a single or linkable 2-band or 4-Band PEQ (Mic inputs and RCA S1 and
S2).
EQ On/Off
Turns the PEQ on and off.
Type Low Shelf, HighShelf, Low/High Shelf and Bell
The Type selector allows you to select either a Low, High, Low/High shelf or Bell EQ curve.
ZonePRO™ User Manual
20