dbx Zone Pro 1260 Manual

The ZonePro products have been created to provide state-of-the-art signal processing for
™
for commercial audio applications, while maintaining a simple, secure and intuitive interface.
From the powerful DSP modules to the multiple control interfaces, the ZonePro products
provide all the processing and control necessary for these installations. Additionally, the
GUI interface and Wizard function allows any contractor to quickly set up and optimize the
unit to its full potential by streamlining the configuration process with a simple step-by-step
procedure.
The ZonePro products are based on the same unparalleled design philosophy that made the
DriveRack family famous. This philosophy, "To provide everything you need between the
sources and the amplifiers," creates a full featured processor capable of almost any BGM or
commercial application. Each input channel provides EQ, while the mic/line inputs also
offer two DSP insert blocks with a selection of Compression, Notch Filtering, Auto Gain
Control, Advanced Feedback Suppression (AFS™), Gating, and De-Essing. Each output zone
provides a routing matrix where each of the inputs can be selected as the main source or
priority source. Paging can be done from the mic/line inputs; both paging and priority over-
ride offer full Ducking capability. Each output also provides Autowarmth
and Crossover filtering, Parametric EQ, a selectable Dynamics module and output Delay. For
more information please visit www.dbxpro.com.
• Advanced Feedback
Suppression (AFS
• Autowarmth ®
• Auto Gain Control
• Compression
• Limiting
• Noise Gating
• Notch Filtering
• Bandpass and Crossover
Filters
• Parametric EQ
) • Security Lockout
™
• Wall Panel Control
• RS-232 and Ethernet Control
• IEC, UL, and CSA Certified
® , full Bandpass
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Int'l Fax (801) 568-7583
customer@dbxpro.com
http://www.dbxpro.com
A Harman International Company
18-0370 -A 07/04