™
ZonePRO
Section 4
Detailed Parameters
4.7 - De-Esser (Insert Module)
The ZonePRO™ offers a de-Esser module. This De-esser effect is ideal for removing unwanted
vocal sibilance. These parameters are user adjustable on all programs and are as follows:
De-Esser On/Off
Turns the De-Esser on or off.
Freq 800 Hz to 8.00 kHz
This is the center frequency the De-Esser uses when in Band Pass mode or the corner frequency
used when in High Pass mode.
Amount 0 to 100%
This controls the amount of De-Essing. The amount control is very much like a combination
threshold / ratio control. A higher amount applies more De-Essing to the signal.
Type HP or BP
Selects the type of filter used by the De-Esser.
Width
Sets the Q of the Band Pass Filter.
ZonePRO
™
User Manual
27