Specifications - dbx Zone Pro 1260 User Manual

ZonePRO
Flash Update (1261 Only)
A 1261 firmware release will include a PC application that will download the new version to a unit connected via RS232.
The receiving 1261 should be running. Follow the directions in the PC flasher application. If, for some reason, you are
not able to update your firmware successfully using this method, there is another "backdoor" method. This method
forces the 1261 into a special Flash Update Receive Mode: In the "Help" tab of the program dialog of ZonePRO Designer
select 641/1261 Operation > Flash Start. Close ZonePRO Designer and open the PC flasher application. Follow the direc-
tions in the PC flasher application. Disconnect and then reconnect the power to the 1261 when the flash is complete.
Analog Inputs:
Number of Inputs:
Connectors:
Type:
Impedance (Euroblock):
Impedance (RCA):
Max input line level:
CMRR:
Mic Pre gain:
Mic EIN:
Mic Phantom Power:
Analog Outputs:
Number of Outputs:
Connectors:
Type:
Impedance:
Max Output Level:
A/D Performance:
Type:
Dynamic Range line:
Type IV dynamic range:
Sample Rate:
D/A Performance:
Dynamic Range:
System Performance:
Dynamic Range:
THD+N:
Frequency Response:
Interchannel Crosstalk:
Crosstalk input to output:
Propagation Delay
Operating voltage:
Power Requirements:
Physical:
We i g h t:
Dimensions:
Safety Agency Certifications:
™
12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF
Euroblock (Line and Mic), RCA (Source) and RCA (S/PDIF)
E l e c t ronically balanced, RF filtere d
> 50k Balanced, >25k Unbalanced, RF Filtere d
>25k Unbalanced, RF Filtered
+20dBu Mic/Line, +12dBu RCA
> 40dB, typically >55db @ 1kHz
30 to 60dB
> 118dB, 22Hz-22kHz, 150 Source Impedance
15V
6
Euroblock
E l e c t ronically balanced, RF filtere d
120 balanced, 60 unbalanced
+20dBu
dbx Type IV™ conversion system
>113 dB A-weighted, >110 dB unweighted
>119 dB, A-weighted, 22kHz BW>117 dB, unweighted,
22kHz BW
48kHz
112 dB A-weighted, 109dB unweighted
>110 dB A-weighted, >107dB unweighted,
0.003% typical at +4dBu, 1kHz, 0dB gain
20Hz – 20kHz, +/- 0.5dB
>80dB typical
>80dB
0.6 msec
100-240 VAC, 50/60Hz
27 Watts
6.0 lbs.(2.7 kg) Shipping weight 8.0 lbs. (3.6 kg)
1.75" H x 8" D x 19" W
UL 60065, IEC 60065, E 60065, EN 55013
Appendix
A.2 - Specifications
ZonePRO™ User Manual
51