™
ZonePRO
Section 3
System Setup
3.5 - Storing Scenes
After editing parameters the scene needs to be stored. You can store the scene by using the
Scene Store button at the base of the device view, or use the Scene Wizard Menu also found
in the device view.
3.6 - Scene Wizard
The Scene Wizard function is used to change ZC associations, or Zone Routing for different
scenes. From the Program Screen view Select the Wizard pull down from the menu bar and
then select the option labeled Scene Wizard. Once selected, a window will appear as follows:
Once your changes have been made for page 1, press the NEXT button and page 2 will appear
as follows:
Once your changes have been for the scene wizard, press the FINISH button to exit.
ZonePRO
™
User Manual
17