Power Led (Pin 3 & Pin 4); Suspend Led(Pin 5 & Pin 6); Power Button (Pin 9 & Pin10); Com Port Connector (Cn8,Cn13,Cn14) - Intel PCI-6886 User Manual

Pci intel celeron m 600mhz 0l2 half-sized sbc with vga/ lvds/lan/usb2.0/sata and sdd

Table of Contents

The HDD LED indicator would light when HDD works.

2.19.3 Power LED (Pin 3 & Pin 4)

Pin 3 & Pin4

The Power LED indicator would light when the power is on.

2.19.4 Suspend LED(Pin 5 & Pin 6)

Pin5&Pin6

The Suspend LED indicator would light when the computer is suspend.

2.19.5 Power Button (Pin 9 & Pin10)

The PCI-6886 provides an ATX power input connector. When connected

with PIN 9 & PIN 10, it enables power On/Off from the chassis.

The PCI-6886 provides four serial ports (COM1,COM3,COM4: RS-232

and COM2: RS232/RS422/RS485). CN13 supports COM1, CN14 sup-

ports COM2, CN8 supports COM3, COM4. and JP1 is for COM2 RS232/

RS422/RS485 selection. It provides connections for serial devices (a

mouse, etc.) or a communication network. You can find the pin assign-

ments for the COM port connector in Appendix B.

The PCI-6886 board provides a keyboard connector that supports both a

keyboard and a PS/2 style mouse. In most cases, especially in embedded

applications, a keyboard is not used. If the keyboard is not present, the

standard PC/AT BIOS will report an error or fail during power-on self-

test (POST) after a reset. The PCI-6886's BIOS standard setup menu

allows you to select "All, But Keyboard"under the "Halt On"selection.

This allows no-keyboard operation in embedded system applications,

without the system halting under POST.

In addition to the Mini keyboard connector on the PCI-6886's rear plate,

there is an additional onboard external keyboard connector, allowing for

greater flexibility in system design.

PCI-6886 User's Manual

Table of Contents