Table of Contents
Advertisement
5.2 Installation of the SVGA Driver
Complete the following steps to install the SVGA driver. Follow the pro-
cedures in the flow chart that apply to the operating system that you are
using within your board.
Notes:
5.2.1 Installation for Windows 2000/XP
To install SVGA driver for Window 2000/XP, please run the setup wizard
"Intel Extreme Graphic 2" in CD-ROM. Example of installation is shown
1
as bellow:
1.
Select the path: D:\2_VGA, then double click "win2k_xp141" to
run "Install Shield Wizard"
1. The windows illustrations in this chapter are
intended as examples only. Please follow the
listed steps, and pay attention to the instruc-
tions which appear on your screen.
2. For convenience, the CD-ROM drive is des-
ignated as "D" throughout this chapter.
45
Chapter 5
Advertisement
Table of Contents
