Placing A Call For 1Tr6 - ZyXEL Communications Omni TA128 User Manual

• Y1 - international number.
• Y2 - national number.
• Y3 - network specific number.
• Y4 - subscriber number.
Nn is the identifier of numbering plan:
• N0 - unknown (default if Nn is omitted).
• N1 - ISDN numbering plan (Rec. E.164).
• N3 - data numbering plan (Rec. X.121).
• N4 - telex numbering plan (Rec. F.69).
• N8 - national standard numbering plan.
• N9 - private numbering plan.
Zn specifies the type of the Subaddress:
• Z0 - NSAP (Rec. X.213) with AFI=0x50, IA5 characters
(default if Zn is omitted).
• Z2 - user specified, IA5 characters.
The called_party_number or an appropriate part of it, will be sent
to the addressed entity. The called_party_subaddress will be
transferred transparently by the ISDN network to the destination.
Use ATDL to redial the last dialed telephone number (and/or
subaddress).

Placing a call for 1TR6

The ATDx[Yn][Nn]destination_address command is used for
dialing as follows.
x = I (ISDN data), A (the analog adapter 1), or B (the analog adapter
2)
Yn specifies the type of address:
82