On The Windscreen; Moving The Unit Holder; Attaching The Traffic Assist; Removing Traffic Assist - Becker Traffic Assist Z 107 Operating Instructions Manual

On the windscreen

The unit holder can be attached directly
to the windscreen using the suction mech-
anism.
> Select a suitable spot to attach.
> Press the base
with its suction sur-
3
face against the windscreen. Turn
1
the unit holder such that the carrier
plate is positioned roughly in the de-
sired viewing direction.
> Press the lever down.
2
The holder has attached itself firmly to the
windscreen. It can now be adjusted with
precision. In order to remove it, operate
the lever again.
2

Moving the unit holder

> Unscrew the fastening screw
the carrier plate can be moved with-
5
out excessive force.
> Move the carrier plate
5
quired position and hold it in this posi-
tion.
> Tighten the fastening screw
ciently so that the Traffic Assist is held
securely in place when the vehicle is in
motion.

Attaching the Traffic Assist

> Position the Traffic Assist, with the at-
tachment points on the bottom of the
housing, on the carrier plate
> Press the Traffic Assist onto the carrier
plate without using excessive force
until the clip engages in the at-
5 6
tachment point.

Removing Traffic Assist

Press the clip of the unit holder with your
finger and use your free hand to take
6
the unit out of the unit holder.
GENERAL OPERATION
Switching the Traffic Assist
until
4
on/off
The unit is switched on and off using the
to the re- key .
suffi-
4
.
5

Switching on

> Press the key
The unit is switched on. The manufactur-
er's logo appears on the touch screen.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
for a few seconds.
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
21