Standard Installation - Kenmore 240-volt compact electric dryers Owner's Manual & Installation Instructions

240-volt compact electric dryers
Hide thumbs Also See for 240-volt compact electric dryers:
Table of Contents

Advertisement

A. SELECT LOCATION
FOR YOUR DRYER
Selecting the proper location for your
dryer makes installation
easier and
gives you the best drying performance,
STANDARD INSTALLATION
Check location where dryer will be installed.
Proper installation is your responsibility.
Make sure you have everything necessary
for correct installation including proper
floor support, a level floor, and a separate
3g-amp. fuse.
• Protect dryer from the weather. Proper
operation of dryer cycles requires
temperatures
above 45°F, At lower
temperatures,
the dryer may not shut
off at the end of automatic cycles, and
drying times will be extended.
Explosion Hazard
Keep flammable materials and vapors,
such as gasoline,
away from dryer.
Place dryer at least 18 inches above
the floor for a garage installation.
Failure to follow these instructions
can result in death, explosion,
or fire.
• Check code requirements.
Some
codes limit or do not permit installation
of clothes dryers in garages, closets,
mobile homes, or sleeping quarters.
Contact your local building inspector.
J
_-
_
Separate
\
30.ompf_
OroonOe0rece
'
'_
/
Withinf 2 _;ee' ° f either
Support: Floor must be
Level floor: Maximum
sturdy enough to support
allowable slope under entire
a total weight of 110
dryer - 3/_inch.
pounds (includes dryer
and lead weight).

Advertisement

Table of Contents
loading

Table of Contents