Kenmore 240-volt compact electric dryers Owner's Manual & Installation Instructions page 6

C, MAKE ELECTRICAL CONNECTION (pgs, 12-20)
Hold-down screw
Terminalblock cover
If using a power cord:
Tools Needed: Parts Needed:
V4-1nch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Flashlight {optional
depending on installation)
New 3- or 4-wire, 30-amp.
U.L.-listed power supply
cord kit (includes strain relief)
If making a direct wire connection:
V4-1nch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Wire stripper Flashlight (optional
depending on installation)
10-gauge, 3- or 4-wire, 314':U.h-listed,
flexible armored strain relief
or non-metallic
sheathed copper cable
(with grounding wire)