Installation Instructions; Tools And Parts; Optional Accessories - Kenmore 8945 Series Use & Care Manual

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Pliers Cutting knife
Level
screwdriver
Wrench
Parts supplied
Remove parts package from dryer drum. Check that all parts are
included.
MANUAL-BOOK
(DC68-02866C)
"Y"-CONNECTOR
(DC97-15103A)
ShoRt INlet hoSe
(DC97-15249A)
NOTE: Do not use leveling legs supplied with dryer if installing
on a pedestal..
CA-KENMORE-DRYER_DC68-02866D_EN_140613.indd 7

INSTALLATION INSTRUCTIONS

Nut drivers
flat-blade
Duct tape
DIE-RACK DRY
(DC61-02773A)
HOSE WATER
(DC97-15692A)
RubbeR WASheR
(DC62-40178A)
Mobile home installations require metal exhaust system
hardware available for purchase from your local Sears store
or Sears Service Center. For further information, please call
(1-800-469-4663).
1-800-4-MY-HOME ®

Optional Accessories

Pedestal
You have the option of purchasing a pedestal for this dryer. You
may select a 14"(35.5cm) pedestal. Remember that the pedestal
will add to the total height of the unit. The pedestals are available
in several colors.
Optional pedestal
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME
®
Pedestal Height Color
14"(35.5cm) Blue Silver
14"(35.5cm) Imperial Silver
14"(35.5cm) Stratus Gray
Stacking Kit
Are you planning to stack your Kenmore washer and dryer?
To do so , purchase an optional stacking kit (Model:18888) from
your local Sears store or Sears Service Center.
Follow instructions included with the kit.
Side Vent Kit
Use the Side Vent Kit (Model : 18004) for venting directly on
either side or on the bottom.
You can also purchase the kit from your local Sears store or
Sears Service Center.
Follow instructions included with the kit.
Vent cap Elbow
Duct Back-Right Duct Front
(1-800-469-4663).
Model Number
19105
19107
19116
Duct Back-Left
Duct Front-Bottom
7
2014-06-13 10:53:58