Table of Contents
Advertisement
B. INSTALL LEVELING LEGS
Leveling your dryer correctly will
reduce operating noise and provide
improved drying performance.
STEP 1. Take two of the cardboard
corners from the carton. Place them
on the floor in back of the dryer.
STEP 2. Firmly grasp the body of the
dryer. Gently lay dryer on the cardboard
corners.
STEP 4. Now stand the dryer up
and move it close to its final location.
Leave enough room to connect the
exhaust vent.
STEP 5. Check levelness of dryer by
placing a level on top of the dryer, first
side4o-side;
then front4o-back.
STEP 3. Start to screw the legs into the
holes by hand. Use a wrench to finish
turning the legs. They should stick out
about 1 inch.
STEP 6. if dryer is not level, prop the
dryer up using two stacked cardboard
corner posts. Use a wrench to adjust
the legs up or down.
NOTE: it may be necessary to level
the dryer again after it is moved into
its final position.
11
Advertisement
Table of Contents
