Automatic Cancellation Of A Unit Price; Setting "F" Functions - A&D SF-6KB Instruction Manual

SF/SG Series Operating Instructions

12. Automatic Cancellation of a Unit Price

In very busy applications, it may be more convenient for the Unit Price entry to return to zero after each
operation.
Note:
To use this function, F2 must be set to 0. Refer to "13. Setting "F" Functions".
To do this, press
WEIGHT
WEIGHT
While the display shows the above, press

13. Setting "F" Functions

"F" functions allow the programming of various functions of the SF/SG scale. The following is a brief
description of these functions and how to program them.
Step 1: Starting with the power off, press and hold
Step 2: Press
Step 3: Use the numerical keypad to select a setting for each function.
Press
Press
Press
while the display is in normal operation.
1
CHANGE
PRICE
UNIT PRICE
ut c
TOTAL M+
PRICE
UNIT PRICE
Ut nc
TOTAL M+
*
to select the desired "F" function group.
C
to cancel the selection.
*
to move to the next "F" function.
to store each setting selected.
MEM
Automatically clears the unit price.
Does not automatically clears the unit price.
1 again to change the setting.
CHANGE
0
and turn on the power switch.
ZERO
WEIGHT
The scale displays:
PRICE
UNIT PRICE
F 1 -
TOTAL M+
UNIT PRICE
F 1 - 1
F1-1
F7-1
F2-0
F6-0
F3-8
F5-1
F4-4
"F" Functions continued...
11