Table of Contents
Advertisement
SF/SG Series Operating Instructions
Step 6: Press the PLU 2 key. The data will be sent to the printer and the scale will return to the normal
weighing mode. If the scale will not return to the normal weighing mode, check the values
entered.
Step 7: Using the numerical keypad, enter "1", "0", "0", "6", "2", "0", "0", "1", "0", "9", "4" and "5" in
this order. If an error is made, press
Step 8: Press the PLU 3 key. The data will be sent to the printer and the scale will return to the normal
weighing mode. If the scale will not return to the normal weighing mode, check the values
entered
14-4 Combining the designed data with a PLU number
Assign a PLU number to a label number of the designed data stored in the AD-8124 as follows:
Note:
The label numbers are the same as the PLU numbers at the time of printer shipment.
Example: Assign the PLU number 5 to the label number 12.
Step 1: While holding down
power switch is turned on.
The WEIGHT display reads
display for the SF series scale and in the UNIT PRICE display for the SG series scale.
SF series
1006
WEIGHT
2001
PRICE
0945
UNIT PRICE
M+
Set Ln
"
SF series
set ln
WEIGHT
000
PRICE
UNIT PRICE
C
to clear the values. And re-enter the values.
SG series
WEIGHT
1006
, turn the scale's power switch on. Assure that the printer
"
. A 3-digit label number
SG series
WEIGHT
set ln
PRICE
UNIT PRICE
2001
0945
000
"
"
appears in the PRICE
PRICE
UNIT PRICE
000
AD-8124 continued...
15
Hide quick links:
Advertisement
Table of Contents
