Common Supervisor Customisation Operations; Supervisor Customisation - Panasonic S-ICX Technical Manual

Built-In ACD Supervisor Guide

Common Supervisor Customisation Operations

1) PROG KEY
2) MEMORY KEY
3) HOLD KEY
4) FL/R KEY
5) CONF KEY
6) REDIAL KEY
7) PREV/NEXT KEY: Scrolls screens if the address has more than one

Supervisor Customisation

Each item can be customised by operations from the supervisor menu. The
following shows the operation of customisation from the supervisor menu.
Operation
SUPERVISOR MENU
SYSTEM INFO
MIS REPORT
CUSTOMIZE
DISP SYS INFO
CUSTOMIZE MENU
LINE REGIST.
SYSTEM ID
AGENT ID
GROUP SETTING
CALL HANDLING
14
: Returns to Supervisor Top Menu.
: Goes to the upper layer.
: Validates data or goes to the next setting.
: Returns to the previous address number.
: Clears data.
: Displays the data before entering program
parameter.
screen.
1. From [SUPERVISOR MENU] screen, press the soft key 3 or 8 to
select [CUSTOMIZE].
2. Select a desired menu by using the soft key from the
[CUSTOMIZE MENU] screen.
3. For further operations, see desired section in this manual.
S-ICX (International) issued October 2000
Section 521
S-ICX-5.0-521 (ACD 4.0)