Panasonic S-ICX Technical Manual page 12

Built-In ACD Supervisor Guide
SEARCH 2,020
03:Search Timer
AGENT SEARCH
TIME
1 to 600 sec.
List
Example:
SEARCH 2,015,010
03:No Ans Timer
Enter The AGENT
NO Ans Time.
1 to 600 sec.
List
Note:
• The program line is updated when the final parameter setup is completed at
• If you press soft key 10 and select List at any of the above steps, the List
• The END/DISC line cannot be changed nor deleted.
8
3. Set parameter 2, and press the HOLD key.
Example: Press keys 0, 1 and 5 to set the Search Timer to 15.
4. Set parameter 3, and press the HOLD key.
Example: Enter three digits to set the No Ans Timer.
The program line that was set is updated when the final parameter
is set. The next line is moved to, and the screen in step 1 is
redisplayed.
5. Repeat steps 1 to 4 to set other program lines, and end
programming at the END/DISC line.
each command, and the next line is moved to. (Example: In the case of the
FWD command, the program line is updated when the no answer timer of
parameter 2 is input, and the next line is moved to.)
Mode screen is redisplayed.
S-ICX (International) issued October 2000
Section 521
S-ICX-5.0-521 (ACD 4.0)