Cisco Aironet Wireless LAN Client Installation And Configuration Manual page 30

Removing the Client Adapter
Step 4 Remove the screw from the top of the CPU back panel above the PCI expansion slot that holds your client
adapter.
Step 5 Pull up firmly on the client adapter to release it from the slot, and carefully tilt the adapter to allow it to
clear the opening in the CPU back panel.
Step 6 Reinstall the screw on the CPU back panel, and replace the computer cover.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
2-8
Chapter 2 Installing the Hardware
OL-1744-02