Table of Contents
Advertisement
1
Mobile Broadband card
NOTICE:
To avoid damaging the Mobile Broadband card, never place cables on top of or under the card and ensure that you route the cables properly.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband
card.
c. Connect the white antenna cable to the connector on the card marked with a white triangle; connect the black antenna cable to the connector on
the card marked with a black triangle.
Subscriber Identity Module (SIM) Card
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the procedures in
Before You
2. Remove the battery (see
Replacing the
1
SIM card
NOTICE:
Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before
you insert or remove the card.
3. With the cut-off corner on the card facing away from the card slot, insert the SIM card into the slot so that it slides under the metal tabs on the sides.
Hard Drive
CAUTION:
If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
2
antenna wires (2)
Begin.
Battery).
2
metal brackets (2)
Advertisement
Table of Contents
