Attach headphones to the
connector.
Attach a microphone to the
connector.
infrared sensor —
Lets you transfer files from your computer to another infrared-compatible device without using cable connections.
When you receive your computer, the sensor is disabled. You can use the system setup program (see System Setup Program) to enable the sensor. For
information on transferring data, see Windows Help, the Help and Support Center, or the documentation that came with your infrared-compatible device.
smart card slot —
Supports one smart card. See
wireless switch —
Turns on/off wireless devices such as Wi-Fi and internal cards with Bluetooth technology and scans for wireless networks. For more
information about scanning for wireless networks, see Dell™ Wi-Fi Catcher™ Network Locator.
1
"off" position
2
4
Wi-Fi Catcher light
Wireless switch positions
"off"
Disables wireless devices
"on"
Enables wireless devices
"momentary" Scans for Wi-Fi networks. See
information.
Wi-Fi Catcher™ light —
The light operates as follows:
Flashing green: Searching for networks
¡
Solid green: Strong network found
¡
Solid yellow: Weak network found
¡
Flashing yellow: Error
¡
Off: No signal found
¡
PC Card slot —
Supports one PC Card, such as a modem or network adapter, or an ExpressCard (with a PCMIA adapter). The computer ships with a blank
installed in the slot. For more information, see
hard drive —
Stores software and data.
Right Side View
Using Smart
Cards.
"on" position
3
"momentary" position
Dell™ Wi-Fi Catcher™ Network Locator
Card
Types.
for more