Table of Contents
Advertisement
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
Before You
2. Turn the computer right-side up and open it.
1
hinge cover
3. Remove the hinge cover (see
1 keyboard tabs (5)
4 keyboard connector on system board
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
4. Remove the three screws across the top of the keyboard.
NOTE:
Lift the keyboard carefully in
5. Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector.
Begin.
2
keyboard
Hinge
Cover).
2
screws (3)
5
keyboard cable connector
step 5
to ensure that you do not pull on the keyboard cable.
3 palm rest
6 pull-tab
Advertisement
Table of Contents
