Connecting A Cable To The Redundant Ethernet Port On The Bsr 2000 - Motorola BSR 2000 Installation Manual

BSR 2000 Installation Guide
Connecting a Cable to the Redundant Ethernet Port on the
BSR 2000
The BSR 2000 provides support for 1:1 software-based redundant operation. In
redundant configuration, two BSR 2000s are interconnected via a dedicated
10/100BASE-T Ethernet link. The redundant port is labeled RED, and is color-coded
in black. To connect a cable to the redundant port, follow these steps.
1. Connect a male shielded RJ-45 connector to the redundant Ethernet port. See
2. Connect the opposite end of the network cable to the redundant Ethernet port on
Figure 2-6 Connecting a Cable to the Redundant 10/100 Port
2-10
Figure 2-6.
the second BSR 2000.
RED Bits
To secondary
BSR 2000
1 2 3 4 5
0
bsr2k029
MGBI 526359-001