Normal Display - Toshiba G8000 SERIES Installation And Operation Manual

13.4

Normal Display

The Normal Display screen indicates the UPS operational status and provides various screens: an operation
guidance screens, mode screens and measured data screens. Table 13.3 shows these screens page by
page and illustrates the UPS Normal Display operational status screens.
OPERATIONAL STATUS SCREENS
BYPASS
PRESS 'RUN' SWITCH
UPS SUPPLY
AC-VO 480[V]
AC- I O
OPERATION MODE
NORMAL OPERATION MODE
SYNC.
MEASUREMENT SCREENS
O/P VOLTAGE
VOLT.
FREQ. 60.0[Hz]
O/P CURRENT (R.M.S.)
U 50[%]
V 50[%]
W 50[%]
G8000 Series Installation and Operation Manual
TABLE 13.3 - NORMAL DISPLAY SCREEN EXAMPLES
Shows the UPS status at the top and guidance
message or measured data underneath.
Shows a guidance message at start up.
Shows the output voltage and current after start up.
50[%]
Shows the UPS Operation mode.
Output Voltage: Shows the output line-to-line
output voltage.
480[V]
Output Current: Shows the RMS output current
(%) for each phase..
57