Grandstream Networks GXV-3000 User Manual page 32
Ip video phone
Hide thumbs
Also See for GXV-3000:
- User manual (62 pages) ,
- Quick installation manual (8 pages) ,
- Faq (3 pages)
Table of Contents
Advertisement
Call Progress
Using these settings, users can configure ring or tone frequencies based on parameters from local
Tones
telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of silence. In order to set a
continuous ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and
then repeat the pattern. Up to three cadences are supported.
Start Browser
Start the embedded mini browser in LCD once the phone boot up.
On Boot
Default is No.
Enable Browser
Turn on the toolbar of the mini browser if having USB keyboard/mouse plugged.
Toolbar
Default is Yes.
Browser
The mini browser home page. Default is
Home Page
The mini browser using special format similar to cell phone, e.g.:
Disable
Default is No. If set to Yes, the call waiting will be disabled.
Call-Waiting
Disable
Default is No. if set to Yes, the call waiting tone will be disabled.
Call-Waiting Tone
Disable
Default is No. If set to Yes, the direct IP call will be disabled and not working.
Direct IP Call
Use
Make an direct IP call by dialing last octet of IP address (3 digits instead of 12 digits IP address) if
Quick IP-Call
phones are in the same LAN/VPN. No SIP server required and that field should be blank.
Mode
Default setting is No.
When set to YES, if #XXX# is dialed, where X is 0-9 and XXX <=255, phone will make direct IP
call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the LAN/VPN IP address REGARDLESS
of subnet mask.
#XX or #X also valid so leading 0 is not required (but OK). See Quick IP Call Mode for details.
Allow Media
Default is No.
Loopback
If set to Yes and server/proxy supports this feature, phone will feed loopback information to server.
Lock keypad
Default is No. If set to "Yes", the configuration changes via keypad are disabled.
update
Caution:
Phone could get LOCKED if user configured this option but forgot administration password or
WebUI access broken.
Grandstream Networks, Inc.
about:/start.htm
GXV-3000 User Manual
Firmware 1.1.3.50
http://mobile.boston.com
Page 30 of 54
Updated: 04/2009
Advertisement
Table of Contents
