Camera Local Loopback Display and OSD ON/OFF
Enable/Disable camera local loopback display and OSD (On Screen Display). This key functioning in loop
switch when pressed continuously, the camera local loop back, OSD display, PIP, PIP swap will appear
or happen on the LCD screen continuously in a loop mode.
OSD Display Explanation:
•
PCMU/H.264
: Audio / Video codec used in the call, this shows audio is using G.711 µlaw (PCMU)
U
U
and video is using H.264
•
86K/15F
: This shows RECEIVING bandwidth used in the call (OSD always shows other side
U
U
bandwidth used). Video bandwidth received is 86K @ 15 frames per second. The top left and
right time stamp show current time and call duration.
Grandstream Networks, Inc.
GXV-3000 User Manual
Firmware 1.1.3.50
Page 16 of 54
Updated: 04/2009