Chart Setup; Chart Offset - Furuno 1823C Operator's Manual

Furuno color video plotter; marine radar
Hide thumbs Also See for 1823C:
Table of Contents

Advertisement

5. CUSTOMIZING YOUR UNIT
5.4

Chart Setup

This paragraph shows you how to setup digital charts, from offsetting chart
position to turning chart attributes on or off.
5.4.1

Chart offset

In some instances position may be off by a few seconds. For example, the
position of the ship is shown to be at sea while it is in fact moored at a pier. You
can compensate for this error by offsetting chart position as shown in the
procedure below.
1. Show the plotter display, then press the [MENU] key followed by the CHART
SETUP and CHART OFFSET soft keys.
2. Use the trackball to place the cursor at the correct latitude and longitude
position of own ship.
3. Press the SET OFFSET soft key.
4. Press the [MENU] key to close the menu. The "chart offset icon" ( ) appears
at the top of the display.
To cancel chart offset, press the RESET OFFSET soft key at step 3 in the above
procedure.
5-12
+
+
34 22. 3456'N
353.9 M
080 22. 3456'E
0.75nm
16.0nm
WP-002
FISH
Plotter display, chart offset selected
TRIP NU
CHART
9.9 nm
OFFSET
SET
OFFSET
RESET
OFFSET
RETURN
BRIDGE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1933c1943c1833c1953cGd-1900cNavnet gd-1900c ... Show all

Table of Contents