Alarm Information - Furuno 1823C Operator's Manual

3. PLOTTER OPERATION
3.11.8

Alarm information

When an alarm setting has been violated, the buzzer sounds and the speaker
icon appears and is red. Press the [CLEAR] key to silence the alarm. You can
see which alarm has been violated on the ALARM menu. In the example below
the arrival alarm has been violated.
1. Press the [ALARM] key. The name of the offending alarm appears in the
alarm information window.
2. Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the
buzzer if it was not done with the [CLEAR] key). The color of the speaker
icon changes from red to background color. The icon remains on the screen
until the cause of the alarm is eliminated or the alarm is disabled. If more
than one alarm has been violated the message CONTINUE appears at the
bottom of the alarm information window. In this case, press the NEXT INFO
soft key to see which other alarms have been violated.
3. Press the [ALARM] key to finish.
Note: The alarm icon is red when an alarm setting is violated, and changes to
background color when the [CLEAR] key or CLEAR ALARM soft key is
pressed. The color does not change regardless of how many other alarms
are violated.
3-58
ARRIVED
AT WAYPOINT XXX !
XXX = Destination waypoint name
Plotter alarm menu, page 1
ALARM1
EDIT
CLEAR
ALARM
NEXT
PAGE
RETURN
Speaker icon