Advertisement
Grounding
Instructions
For models
factory-equipped
with
a power
cord:
For personal
safety, this appliance
must be
properly
grounded.
For maximum
safety, the
power
cord must be plugged
into an elec-
trical
outlet that is correctly
polarized
and
properly
grounded.
If a two-prong
wall
receptacle
is the only available
outlet, it is the
personal
responsibility
of the consumer
to
have it replaced
with a properly
grounded
three-prong
wall
receptacle
installed
by a
qualified
electrician.
Grounding
type
wall
receptacle
Power supply
cord
with
3-prong
grounding
plug
Avoid fire hazard
or electrical
shock. Do not use an adapter
plug, and
extension
cord, or remove
grounding
prong
from the power cord.
Failure to follow
this
warning
may cause serious injury, fire, or
death.
This appliance
is equipped
with a
three-prong
grounding
plug. For your protec-
tion against
shock hazard,
it should
be
plugged
directly
into a properly
grounded
receptacle.
Do not cut or remove the
grounding
prong from this plug.
See the installation
instructions
packaged
with this appliance
for complete
installation
and grounding
instructions.
Important
note:
This appliance
allows for conversion
to
Liquefied
Petroleum
(L.P.) Gas.
Conversion
to L.P. Gas
Personal injury or death from
electrical
shock may occur if the conversion
to L.P. gas is not made by a qualified
installer or electrician.
l_]_Any
additions,
changes
or conver-
sions required
in order
for this appliance
to
satisfactorily
meet the application
needs must
be made
by a qualified
technician.
If L.P. conversion
is needed, contact
your local
L.P. Gas provider
for assistance.
The L.P.
conversion
kit is provided
with this appliance
and is located
on the lower REAR (back side)
panel of the range.
Before installing
the kit be
sure to read the L.P. Installation
Instructions
and follow
them carefully
when making
the
installation.Product
Record
You may find the model and serial number
printed
on an identification
label. The label is
located
on the lower right of the oven frame.
Open
the drawer
to see the serial label.
Serial Plate Location
To locate
the serial plate open storage
drawer
(some models)
or warmer
drawer
(some models).
The serial plate is attached
to
the lower right oven frame.
Record the date of purchase, model and serial
number of your product in the corresponding
space
below..
Model
Number:
Serial Number:
Date of Purchase:
Save your sales receipt for future reference.
7
Save
these
instructions
for
future
reference.
Advertisement
