Advertisement
Setting Oven
Controls
Accent Light
Figure 37:
Accent
light feature
located
beneath oven controls
Your appliance
includes a decorative
Accent
light at the base of
the oven controls
panel. The Accent
light provides
a theatre
style
intensity
feature
that slowly
increases
brightness
at turn on and
slowly
fades when turning
off.
When
the Accent
light is off, the light operates
in automatic
mode.
This means the Accent
light will turn on automatically
when an oven, cooktop
function
or feature
such as the Timer
have been activated.
The Accent
light will turn off automatically
when these functions
or features
are no longer
active.
When
the Accent
light is OFF, it may be manually
turned
ON by
pressing
Accent
Light once. When
the Accent
light has been
manually
turned on, it will remain
on until manually
turned off
by pressing
Accent
Light again.
The Accent
light brightness
is
adjustable
from 0 to 100 percent.
To adjust Accent
light brightness:
1.
Press and hold Accent
Light until an acceptance
tone
sounds (about
6 seconds).
2.
The default
brightness
setting
of 100 will appear
in the
display
(Figure
38).
3.
Using the numeric
keys, enter any digit from
0 to 100 to
change
the brightness
level. Entering
0 (Figure 39) will
effectively
turn the Accent
light OFF until the brightness
level is adjusted
to a higher
level.
4.
Press
to save the desired
brightness
setting.
START
Figure 38: Accent
light at highest
intensity
Figure 39: Accent
light at lowest setting
Operating
oven lights
The interior
oven lights will automatically
turn ON when the
oven door is opened.
Press L)
to turn the interior
oven lights ON
and OFF whenever
the oven door is closed.
The oven light will not operate
in Self
Clean.
The interior
oven lights are located
on the rear wall of the oven
interior
and are covered
with a glass shield.
The glass shield
protects
the bulb from high temperatures
and should
always
be
in place whenever
the oven is in use.
To replace
the interior
oven light, see Replacing
oven lights
in
the Care & Cleaning
section.
Note: To check the brightness
level after
adjusting,
press the
Accent
Light key once. For further
adjustment
repeat
steps 1, 3
and 4 above.
26
Advertisement
