Advertisement
Care and Cleaning
Removing
and Replacing
the Oven
Door
The door is heavy.
For safe, temporary
storage,
lay the door
flat with the inside of the door facing
down.
To remove the oven door:
1.
Open
oven door completely,
horizontal
with floor
(See
Figure 60).
2.
Pull the door
hinge locks on both
left and right
door hinges
down from the oven frame
completely
toward
the oven
door (See Figure 61). A tool such as a small flat-blade
screwdriver
may be required.
3.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 62).
4.
Close the door to approximately
10 degrees
from the oven
door frame.
5.
Lift the oven door hinge arms over the roller
pins located
on
each side of the oven frame
(See Figure 62).
To replace
oven door:
1.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 62).
2.
Holding
the oven door at the same angle
as the removal
position
(See Figure 62), seat the hook of the hinge arm
over the roller
pins located
on each side of the oven door
frame
(See Figure 63). The hook of the hinge arms
must be
fully
seated onto the roller pins.
3.
Fully open the oven door, horizontal
with floor
(See
Figure 60).
4.
Push the door hinge locks up toward
and into the oven
frame
on both
left and right oven door hinges to the locked
position
(Figure
61).
5.
Close the oven door.
Important:
Special
Door Care Instructions:
•
Most oven doors contain
glass that can break.
•
Do not close the oven door
until all the oven racks are fully
in place.
Do
not
hit the
glass
with
pots,
pans,
or any
other
object.
Scratching,
hitting,
jarring,
or stressing
the
glass
may
weaken
its structure
causing
an
increased
risk of
breakage
at a later
time.
Oven door
hinge
locations
Figure 60:
Door hinge location
!
Figure 61: Door hinge locks
10o
oven
door -
0
hinge
S
Figure 62:
Holding
door for removal
roller
pin
hinge
arm
/
Figure 63:
Location
of hinge arm and roller pin
39
Advertisement
