Defrost Operation - Kenmore 407.53530 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

1. Tilt the dehumidifier no mare than 45 ° and forcibly insert the casters. Make
sure the ring around the caster is flush against the bottom of the dehumidifier
(Fig. 1)
\
\
\
45>
Fig. 1
\
\
Ring around caster
3o
• install the dehumidifier on a level
floor strong enough to support the unit
with a full bucket of water.
• For best performance,
allow at least
12-18 inches of air space on all sides
of the unit for good air circulation.
• Keep all outside doors, windows and
other openings closed when operating
the dehumidifier. Humid outdoor air
will add to the unit's workload.
• Leave the dehumidifier in an upright
position for 30 minutes before turning
on.
DEFROST OPERATION
The dehumidifier has a built-in defrost
control that senses frost buildup on the
evaporator
coils.
During defrosting, the compressor will
automatically
turn off; the fan will con-
tinue running to defrost the coils.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents