Installing Your Dehumidifier; Defrost Control; Choosing The Proper Location; Automatic Shut Off - Kenmore 580.53509 Owner's Manual

• Install the dehumidifier on a level floor strong enough to
supportthe unitwith a full bucket ol water.
• For best performance, allow at least 12-18 inchesof air
space on all sides of the unit for good air circulation.
• Keep all outside doom, windows, and other openings dosed
when operating the dehumidifier. Humid outdoor air will add
to the unit'swork load.
• Install your dehumidifier in an area where the temperature
will not fall below 65°F (18°C). At temperatures below this,
the coils can become covered with frost, which may reduce
dehumidifyingperformance.
DEFROST CONTROL
When the defrost control senses frost build-upon the
evaporator coil, it will automaticallyshut off the compressor.
The fan will continueto run to draw air across the coil and
melt the frost. When the coil is defrosted, the compressor will
automatica_y restart and dehumidifyingresume.
The defrost feature in the 580.53701 model will
cominuously ¢ycte up to temperatwe ol 4S°F (S°C).
LFI
(is'c)
12~18"
m
• Use the dehumid'd"mr in a basement to help
prevent moisture damage.
o Use the dehumidifier in cooking, laundry,
bathing, and dishwashing areas that have
excessive moisture.
o Use the dehumidifier to prevent moisture
damage anywhere books or valuables are
stored.
When the bucket is full, or when the bucket is not in the proper position,the Bucket Full light tums on
and the unit automatically shuts off.
Also, when bucket is out of position,the unit will bsep 3 times.
The bucket must be replaced in the proper position for tho dehumldffier to work. The light will
be on and the dehumidifier will not run if the bucket Is not in the proper po61tion.
-7-