Your dehumidifier may not start if:
To operate your dehumidifier:
If your dehumidifier is not drying the air as it should, it may be because:
The dehumidifier is not designed to dehumidify the entire house. You should make sure the dehumidifier is the correct size for the area you want to dehumidify. For best effectiveness, it must be operated in an enclosed area with all doors, windows, and other outside openings to the room closed.
You should clean the filter every two weeks.
The Humidity Control can be set anywhere between Off and Max for normal operation. To achieve more dehumidification, turn the Humidity Control toward Max. For less dehumidification, turn it toward Off.
You need to empty the water bucket when the bucket is full, which is indicated by the Auto shut-off light glowing. The dehumidifier will automatically turn off when the bucket is full. Pull out the bucket by grasping the handle, empty it into a large sink or tub, and then replace it properly.
Before performing any maintenance, disconnect the power supply cord from the receptacle.
To clean:
The 'bucket full' indicator, also known as the Auto shut-off light, glows when the bucket fills or is missing. The dehumidifier has a water level control switch and will turn off when the bucket is full or not replaced in the proper position. The dehumidifier will not run if the bucket is not in the proper position.
Need help?
Do you have a question about the 54351 - 35 Pint Dehumidifier and is the answer not in the manual?
Questions and answers
i want to collect water only in the bucket and not go to hole outlet is there a special way to change it
To set the Kenmore 54351 - 35 Pint Dehumidifier to collect water only in the bucket instead of the hose outlet, follow these steps:
1. Remove the drain hose if it is attached.
2. Ensure the drain hole cover is in place to block the hose outlet.
3. Make sure the water bucket is properly installed in its correct position.
The dehumidifier will then collect water in the bucket, and you will need to empty it manually when full.
This answer is automatically generated